How to change the cartridge on a freestanding stainless steel Outdoor Shower - repair instructions
A stainless steel Outdoor Shower e is a durable and elegant addition to any garden, pool area or even for use on yachts and boats. However, as with any faucet, over time it may become necessary to replace the cartridge in the mixing valve to ensure proper function. In this article, we will show you how you can safely and easily replace the cartridge in a freestanding Outdoor Shower and what you should bear in mind when repairing the Outdoor Shower.
Why does the cartridge need to be replaced?
The cartridge is the heart of the mixer tap and regulates the water flow and temperature. Over time, limescale deposits can build up or the seals can wear, which can lead to dripping, fluctuating water temperature or low water pressure. Replacing the cartridge in good time ensures that your stainless steelGartendusche continues to function optimally and that no repairs to the tap are necessary. Here is a video showing how to replace a cartridge in a stainless steel Outdoor Shower.
Tools and materials required for the repair
Before you start replacing the cartridge in the Outdoor Shower, make sure you have the following tools and materials to hand:
- Replacement cartridge (suitable for your shower model)
- Allen key or screwdriver
- Pipe wrench or a suitable wrench
- Possibly an adjustable face spanner
- Silicone grease (optional, for maintaining the seals)
- Soft cloth or rag
Step-by-step instructions for changing the cartridge
- Turn off the water supply
Before you start repairing the Outdoor Shower turn off the water supply. If your stainless steel Outdoor Shower is connected directly to the domestic water supply, close the corresponding shut-off valve. Allow the remaining water to drain off.
- Dismantling the mixing lever
Depending on the model of your Outdoor Shower stainless steel, the mixing lever is located on the front or top. Use an Allen key or screwdriver to remove the cover or screw on the lever. Carefully pull off the mixing lever and note the exact position of the lever.
- Removing the cartridge
As soon as the mixing lever is removed, you will see a union nut holding the cartridge. Loosen it with a pipe wrench or a wrench. Now carefully pull out the old cartridge. If it is calcified, it may help to turn it slightly and then pull it out.
- Insert the new cartridge
Compare the old and new cartridges to ensure that the replacement part fits. Insert the new cartridge exactly into the guide. Make sure that the seals are seated correctly and that there are no foreign objects in the mixer tap.
- Refitting the mixing lever
Tighten the union nut again, but take care not to overtighten it. Then replace the mixing lever and secure it with the screw. Make sure that the mixing lever is replaced in exactly the same position as when you removed it.
- Open the water supply and check the function
Turn the water back on and test the function of the stainless steel yacht shower. Check that the Mixer tap is working smoothly and that no water is dripping. If necessary, tighten the union nut or lubricate the seals with silicone grease.
Conclusion: Changing the cartridge is a simple repair for the Gartendusche
Changing the cartridge in a freestanding stainless steel Outdoor Shower is easy to do with a little manual skill. Regular maintenance and repairs ensure that your stainless steel Poolshower always works optimally and that you can enjoy it for a long time. If you are unsure, we recommend consulting the operating instructions for your shower model or contacting a specialist to repair the Gartendusche.
